高级检索

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

加速器驱动次临界系统散裂靶参数优化计算

李军 罗文 肖拥军 宋英明 朱志超 郭谦 李卓成

李军, 罗文, 肖拥军, 宋英明, 朱志超, 郭谦, 李卓成. 加速器驱动次临界系统散裂靶参数优化计算[J]. 原子核物理评论, 2014, 31(4): 550-554. doi: 10.11804/NuclPhysRev.31.04.550
引用本文: 李军, 罗文, 肖拥军, 宋英明, 朱志超, 郭谦, 李卓成. 加速器驱动次临界系统散裂靶参数优化计算[J]. 原子核物理评论, 2014, 31(4): 550-554. doi: 10.11804/NuclPhysRev.31.04.550
LI Jun, LUO Wen, XIAO Yongjun, SONG Yingming, ZHU Zhichao, GUO Qian, Zhuocheng. Parameter Optimization and Calculation of Spallation Target in Accelerator Driven sub-critical System[J]. Nuclear Physics Review, 2014, 31(4): 550-554. doi: 10.11804/NuclPhysRev.31.04.550
Citation: LI Jun, LUO Wen, XIAO Yongjun, SONG Yingming, ZHU Zhichao, GUO Qian, Zhuocheng. Parameter Optimization and Calculation of Spallation Target in Accelerator Driven sub-critical System[J]. Nuclear Physics Review, 2014, 31(4): 550-554. doi: 10.11804/NuclPhysRev.31.04.550

加速器驱动次临界系统散裂靶参数优化计算

doi: 10.11804/NuclPhysRev.31.04.550

Parameter Optimization and Calculation of Spallation Target in Accelerator Driven sub-critical System

  • 摘要: 采用国际开源程序包Geant4,构建高能质子束轰击加速器驱动次临界系统(ADS) 散裂靶的物理模型,模拟计算质子轰击液态金属铅、铅-铋合金和汞靶的泄漏中子谱分布,以及计算不同能量质子对应的铅靶泄漏中子产额和轴向积分分布,获得1 GeV 质子对应的铅圆柱靶优化参数,考虑入射质子的利用率和整个堆芯的体积质量,优化靶半径范围为16 ~ 24 cm,靶高为100 cm,相关研究结果可为(ADS) 散裂靶的物理和工程设计提供理论依据。We use Geant4 toolkit to model high-energy proton irradiating spallation target in an Accelerator-Driven sub-critical System (ADS). The simulated neutron leakage spectrum resulting from proton bombarding liquid metal targets of lead, lead-bismuth eutectic, and hydrargyrum are obtained. The neutron leakage yields from lead target and their axial integrated distributions are calculated with different incident proton energies.Considering the incident proton efficiency and the whole size and mass of the reactor core, the optimized target radius and target height are suggested to be a range of 16~ 24 cm and 100 cm, respectively, which is helpful for the physical and engineering design of the ADS spallation target.
  • 加载中
计量
  • 文章访问数:  1363
  • HTML全文浏览量:  47
  • PDF下载量:  316
  • 被引次数: 0
出版历程
  • 收稿日期:  1900-01-01
  • 修回日期:  1900-01-01
  • 刊出日期:  2014-12-20

加速器驱动次临界系统散裂靶参数优化计算

doi: 10.11804/NuclPhysRev.31.04.550

摘要: 采用国际开源程序包Geant4,构建高能质子束轰击加速器驱动次临界系统(ADS) 散裂靶的物理模型,模拟计算质子轰击液态金属铅、铅-铋合金和汞靶的泄漏中子谱分布,以及计算不同能量质子对应的铅靶泄漏中子产额和轴向积分分布,获得1 GeV 质子对应的铅圆柱靶优化参数,考虑入射质子的利用率和整个堆芯的体积质量,优化靶半径范围为16 ~ 24 cm,靶高为100 cm,相关研究结果可为(ADS) 散裂靶的物理和工程设计提供理论依据。We use Geant4 toolkit to model high-energy proton irradiating spallation target in an Accelerator-Driven sub-critical System (ADS). The simulated neutron leakage spectrum resulting from proton bombarding liquid metal targets of lead, lead-bismuth eutectic, and hydrargyrum are obtained. The neutron leakage yields from lead target and their axial integrated distributions are calculated with different incident proton energies.Considering the incident proton efficiency and the whole size and mass of the reactor core, the optimized target radius and target height are suggested to be a range of 16~ 24 cm and 100 cm, respectively, which is helpful for the physical and engineering design of the ADS spallation target.

English Abstract

李军, 罗文, 肖拥军, 宋英明, 朱志超, 郭谦, 李卓成. 加速器驱动次临界系统散裂靶参数优化计算[J]. 原子核物理评论, 2014, 31(4): 550-554. doi: 10.11804/NuclPhysRev.31.04.550
引用本文: 李军, 罗文, 肖拥军, 宋英明, 朱志超, 郭谦, 李卓成. 加速器驱动次临界系统散裂靶参数优化计算[J]. 原子核物理评论, 2014, 31(4): 550-554. doi: 10.11804/NuclPhysRev.31.04.550
LI Jun, LUO Wen, XIAO Yongjun, SONG Yingming, ZHU Zhichao, GUO Qian, Zhuocheng. Parameter Optimization and Calculation of Spallation Target in Accelerator Driven sub-critical System[J]. Nuclear Physics Review, 2014, 31(4): 550-554. doi: 10.11804/NuclPhysRev.31.04.550
Citation: LI Jun, LUO Wen, XIAO Yongjun, SONG Yingming, ZHU Zhichao, GUO Qian, Zhuocheng. Parameter Optimization and Calculation of Spallation Target in Accelerator Driven sub-critical System[J]. Nuclear Physics Review, 2014, 31(4): 550-554. doi: 10.11804/NuclPhysRev.31.04.550

目录

    /

    返回文章
    返回