Study on Key Issues of Automatic Modeling for the SN-method Based Particle Transport Simulation Codes Program
doi: 10.11804/NuclPhysRev.23.02.134
- Received Date: 1900-01-01
- Rev Recd Date: 1900-01-01
- Publish Date: 2006-06-20
Abstract: This paper presents two approaches to enhance the geometry modeling ability of SN particle transport simulation codes and focus on the key issues that lie in the processing from CAD model to SN code geometry model, e.g. CAD file format support, void modeling, mesh generation and model-editing. SNAM (SN Automatic Modeling system) has been developed as an interface code between commercial CAD software and SN particle transport simmulation codes. The testing results have shown that the algorithm and implementation used in SNAM are efficient and capable of all the necessary processing from CAD model to SN geometry model.
Citation: | HU Hai-min, LI Jing-jing, LI Ying, ZHENG Shan-liang, WU Yi-can. Study on Key Issues of Automatic Modeling for the SN-method Based Particle Transport Simulation Codes Program[J]. Nuclear Physics Review, 2006, 23(2): 134-137. doi: 10.11804/NuclPhysRev.23.02.134 |