基于FPGA与W5100的高频发射机数据传输系统设计

韩小东; 许哲; 丛岩; 李世龙; 张瑞锋; 仪孝平

doi:10.11804/NuclPhysRev.35.03.308

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于FPGA与W5100的高频发射机数据传输系统设计

韩小东, 许哲, 丛岩, 李世龙, 张瑞锋, 仪孝平

文章导航 > 原子核物理评论 > 2018 > 35(3): 308-312

韩小东, 许哲, 丛岩, 李世龙, 张瑞锋, 仪孝平. 基于FPGA与W5100的高频发射机数据传输系统设计[J]. 原子核物理评论, 2018, 35(3): 308-312. doi: 10.11804/NuclPhysRev.35.03.308

引用本文:

HAN Xiaodong, XU Zhe, CONG Yan, LI Shilong, ZHANG Ruifeng, YI Xiaoping. Design of the Data Transfer System for Radio Frequency Transmitter Based on FPGA and W5100[J]. Nuclear Physics Review, 2018, 35(3): 308-312. doi: 10.11804/NuclPhysRev.35.03.308

Citation:

HAN Xiaodong, XU Zhe, CONG Yan, LI Shilong, ZHANG Ruifeng, YI Xiaoping. Design of the Data Transfer System for Radio Frequency Transmitter Based on FPGA and W5100[J]. Nuclear Physics Review, 2018, 35(3): 308-312. doi: 10.11804/NuclPhysRev.35.03.308

基于FPGA与W5100的高频发射机数据传输系统设计

doi: 10.11804/NuclPhysRev.35.03.308

中国科学院近代物理研究所, 兰州 730000

基金项目: 国家自然科学青年基金资助项目（11505252）

详细信息

作者简介:
韩小东(1990-),男,甘肃张掖人,助理工程师,硕士,船舶与海洋工程;hanxiaodong102@impcas.ac.cn

通讯作者: 丛岩,E-mail:congyan@impcas.ac.cn。

中图分类号: TL56

Design of the Data Transfer System for Radio Frequency Transmitter Based on FPGA and W5100

Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China

Funds: National Natural Science Foundation of China (11505252)

摘要: 高频系统是医用重离子加速器的动力核心。发射机作为高频系统的关键部件，其稳定可靠运行，监控系统至关重要。为实现发射机工作状态远程监控数据的可靠传输，设计了基于现场可编程门阵列（FPGA）与网络接口芯片（W5100）的数据传输系统。该系统包括三部分：首先，基于FPGA与W5100设计了数据传输系统硬件；其次采用硬件描述语言，实现了TCP服务器模式（TCP Server）下的可靠数据传输；最后利用Flash Builder平台，设计了发射机数据传输系统上位机监控界面，实现了高频发射机的远程监控。经长时间测试，该系统运行稳定可靠，数据平均传输速率达到11.32 Mbps，能够完成高频发射机的远程监控。

Radio frequency system is the power core of Heavy Ion Medical Machine. Transmitter, as a key component of the high frequency system, depends heavily on the monitoring system to ensure its stability and reliability. In order to perform a reliable transmission of remote monitoring data of transmitter working state, a data transmission system based on field programmable gate array (FPGA) and network interface chip (W5100) is proposed. The system consists of three parts. Firstly, the hardware of the data transmission system is designed based on FPGA and W5100. Secondly, the reliable data communication under TCP Server mode is achieved by using Hardware Description Language (HDL). Finally, the upper computer monitoring interface is designed and realized by using Flash Builder platform. After a long time testing, the system runs stably and reliably, and the average data transmission rate reaches 11.32 Mbps. The system is capable of remote monitoring to the high frequency transmitters.
- FPGA /
- W5100 /
- TCP /
- 数据传输 /
- 上位机监控界面
Abstract: Radio frequency system is the power core of Heavy Ion Medical Machine. Transmitter, as a key component of the high frequency system, depends heavily on the monitoring system to ensure its stability and reliability. In order to perform a reliable transmission of remote monitoring data of transmitter working state, a data transmission system based on field programmable gate array (FPGA) and network interface chip (W5100) is proposed. The system consists of three parts. Firstly, the hardware of the data transmission system is designed based on FPGA and W5100. Secondly, the reliable data communication under TCP Server mode is achieved by using Hardware Description Language (HDL). Finally, the upper computer monitoring interface is designed and realized by using Flash Builder platform. After a long time testing, the system runs stably and reliably, and the average data transmission rate reaches 11.32 Mbps. The system is capable of remote monitoring to the high frequency transmitters.
- FPGA /
- W5100 /
- TCP /
- Data Transfer /
- Upper computer monitor interface

[1]	SONG Mingtao, ZHAN Wenlong, WEI Baowen, et al. Nuclear Physics Review, 2001, 18(2):116. (in Chinese) (宋明涛, 詹文龙, 魏宝文, 等. 原子核物理评论, 2001, 18(2):116.)
[2]	XIAO Guoqing, ZHANG Hong, LI Qiang, et al. Nuclear Physics Review, 2007, 24(2):85. (in Chinese). (肖国青, 张红, 李强, 等. 原子核物理评论, 2007, 24(2):85.)
[3]	ZHANG Wenzhi,WANG Fengwen, XU Zhe, et al. Atomic Energy Science and Technology, 2006(04):490. (in Chinese) (张文志, 王凤文, 许哲, 等. 原子能科学技术, 2006(04):490.)
[4]	GUN Chun, LI Jinming, ZHU Ping, et al. Chinese Journal of Electron Devices, 2017, 40(02):370. (in Chinese) (郭淳, 李锦明, 朱平, 等. 电子器件, 2017, 40(02):370.)
[5]	LIU Guande, YU Xuefei. Journal of Biomedical Engineering Research, 2008, 27(3):201. (in Chinese) (刘关德, 余学飞. 生物医学工程研究, 2008, 27(3):201.)
[6]	WU Nan. Computer&Network, 2011, 37(Z1):107. (in Chinese) (武楠. 计算机与网络, 2011, 37(Z1):107.)

点击查看大图

计量

文章访问数: 1151
HTML全文浏览量: 87
PDF下载量: 99
被引次数: 0

基于FPGA与W5100的高频发射机数据传输系统设计

doi: 10.11804/NuclPhysRev.35.03.308

中国科学院近代物理研究所, 兰州 730000

基金项目: 国家自然科学青年基金资助项目（11505252）

作者简介:
韩小东(1990-),男,甘肃张掖人,助理工程师,硕士,船舶与海洋工程;hanxiaodong102@impcas.ac.cn

通讯作者: 丛岩,E-mail:congyan@impcas.ac.cn。

收稿日期: 2018-04-09
修回日期: 2018-05-30
刊出日期: 2018-09-20

中图分类号: TL56

关键词:

FPGA /

W5100 /

TCP /

数据传输 /

上位机监控界面

摘要: 高频系统是医用重离子加速器的动力核心。发射机作为高频系统的关键部件，其稳定可靠运行，监控系统至关重要。为实现发射机工作状态远程监控数据的可靠传输，设计了基于现场可编程门阵列（FPGA）与网络接口芯片（W5100）的数据传输系统。该系统包括三部分：首先，基于FPGA与W5100设计了数据传输系统硬件；其次采用硬件描述语言，实现了TCP服务器模式（TCP Server）下的可靠数据传输；最后利用Flash Builder平台，设计了发射机数据传输系统上位机监控界面，实现了高频发射机的远程监控。经长时间测试，该系统运行稳定可靠，数据平均传输速率达到11.32 Mbps，能够完成高频发射机的远程监控。

Radio frequency system is the power core of Heavy Ion Medical Machine. Transmitter, as a key component of the high frequency system, depends heavily on the monitoring system to ensure its stability and reliability. In order to perform a reliable transmission of remote monitoring data of transmitter working state, a data transmission system based on field programmable gate array (FPGA) and network interface chip (W5100) is proposed. The system consists of three parts. Firstly, the hardware of the data transmission system is designed based on FPGA and W5100. Secondly, the reliable data communication under TCP Server mode is achieved by using Hardware Description Language (HDL). Finally, the upper computer monitoring interface is designed and realized by using Flash Builder platform. After a long time testing, the system runs stably and reliably, and the average data transmission rate reaches 11.32 Mbps. The system is capable of remote monitoring to the high frequency transmitters.