基于HIRFL-CSR中剥离器的支束线物理设计

张雪荧; 尹全民; 唐靖宇; 徐瑚珊; 李文飞; 毛瑞士

doi:10.11804/NuclPhysRev.20.04.255

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于HIRFL-CSR中剥离器的支束线物理设计

张雪荧, 尹全民, 唐靖宇, 徐瑚珊, 李文飞, 毛瑞士

文章导航 > 原子核物理评论 > 2003 > 20(4): 255-258

张雪荧, 尹全民, 唐靖宇, 徐瑚珊, 李文飞, 毛瑞士. 基于HIRFL-CSR中剥离器的支束线物理设计[J]. 原子核物理评论, 2003, 20(4): 255-258. doi: 10.11804/NuclPhysRev.20.04.255

引用本文:

ZHANG Xue-ying, YIN Quan-min, TANG Jing-yu, XU hu-shan, LI Wen-fei, MAO Rui-shi. Conceptual Design of a Branch Beam Line after Stripper in HIRFL-CSR[J]. Nuclear Physics Review, 2003, 20(4): 255-258. doi: 10.11804/NuclPhysRev.20.04.255

Citation:

ZHANG Xue-ying, YIN Quan-min, TANG Jing-yu, XU hu-shan, LI Wen-fei, MAO Rui-shi. Conceptual Design of a Branch Beam Line after Stripper in HIRFL-CSR[J]. Nuclear Physics Review, 2003, 20(4): 255-258. doi: 10.11804/NuclPhysRev.20.04.255

基于HIRFL-CSR中剥离器的支束线物理设计

doi: 10.11804/NuclPhysRev.20.04.255

中国科学院近代物理研究所甘肃兰州730000

Conceptual Design of a Branch Beam Line after Stripper in HIRFL-CSR

(Institute of Modern Physics; Chinese Academy of Sciences; Lanzhou 730000; China);

摘要: 介绍了通过剥离器后不同电荷态的束流在弯曲磁铁中的传输情况,由此引出一种切割束流的方法,在此基础上设计了一条支束线,以实现两个实验终端同时供束,增加供束时间.在束运线设计过程中,根据HIRFL CSR的实际条件,对束流的中心轨迹和束流包络做了详细的计算,给出了束流输运线的几何布局和各个元件的基本物理参数. A new branch beam line downstream of the stripper located between SFC and SSC is designed to collect the beams with the charge states other than the most intensive one. The layout of the branch beam line and the physical parameters for each dipole and quadrupole are given based on careful calculations.
- 剥离器 /
- 电荷态 /
- 束流输运
Abstract: A new branch beam line downstream of the stripper located between SFC and SSC is designed to collect the beams with the charge states other than the most intensive one. The layout of the branch beam line and the physical parameters for each dipole and quadrupole are given based on careful calculations.
- stripper /
- charge state /
- transport

点击查看大图

计量

文章访问数: 1812
HTML全文浏览量: 140
PDF下载量: 573
被引次数: 0

基于HIRFL-CSR中剥离器的支束线物理设计

doi: 10.11804/NuclPhysRev.20.04.255

中国科学院近代物理研究所甘肃兰州730000

收稿日期: 1900-01-01
修回日期: 1900-01-01
刊出日期: 2003-12-20

关键词:

剥离器 /

电荷态 /

束流输运

摘要: 介绍了通过剥离器后不同电荷态的束流在弯曲磁铁中的传输情况,由此引出一种切割束流的方法,在此基础上设计了一条支束线,以实现两个实验终端同时供束,增加供束时间.在束运线设计过程中,根据HIRFL CSR的实际条件,对束流的中心轨迹和束流包络做了详细的计算,给出了束流输运线的几何布局和各个元件的基本物理参数. A new branch beam line downstream of the stripper located between SFC and SSC is designed to collect the beams with the charge states other than the most intensive one. The layout of the branch beam line and the physical parameters for each dipole and quadrupole are given based on careful calculations.